GTP-PCM080-PM Phase-Change Materials
Description
GTP-PCM080-PM is a premium series, highly conformable / thermally conductive type silicone-free thermal interface material. It is a reworkable and repeatable phase change material suitable for use between heat generating devices and the surfaces to which they are mounted or other heat dissipating surfaces. As temperatures reach its softening point of 45-60°C, a phase change material begins to melt and flow to fill up the microscopic irregularities of the components it mates within between.
Features & Benefits
- High thermal conductivity: 8.5W/m.K
- Ultra low bond-line thickness
- Outstanding wettability and gap filling
- Good aging stability for long term applications
- Cost-saving solutions
- No pump-out in aging
Typical Applications
- Laser equipment
- High power density LED module
- Power supplies, UPS
- Telecommunication equipment, 5G module units
- Military gadgets, radar, power inverters
- IGBT modules
Remarks:
- Shelf-life can be 12months since date of manufacturing
- Supply form: grease state in cartridges or jars
- Standard packaging: 30cc/100cc/300cc in cartridges or 1kg/jar
More Details
- Data Sheet
| Item | Unit | GTP-PCM080-PM | Standards | |
| PHYSICAL | Color | – | Gray | Visual |
| Viscosity | Pa.s | 300 | ASTM D374 | |
| Softening interval | °C | 45-60 | – | |
| Density | g/cc | 2.8 | ASTM D792 | |
| Minimal BLT | um | 30 | – | |
| Dielectric Strength | KV/mm | >2.0 | ASTM D149 | |
| Breakdown voltage | KV/mm | >2.0 | ASTM D149 | |
| Volume Resistivity | Ω-cm | 1.0×10¹³ | ASTM D257 | |
| TGA Weight Loss | wt% | $<0.3$ | 150°C Cx24hrs | |
| Operating Temp. | °C | -40 ~ 125 | IEC 60068-2-14 | |
| Flammability | – | VO | UL94 | |
| THERMAL | Thermal Conductivity | W/m.K | 8.5 | ASTM D5470 |
| Thermal impedance @ 20psi / 0.08mm | °C-cm²/W | 0.033 | ASTM D5470 | |
| Thermal impedance @ 40psi / 0.08mm | °C-cm²/W | 0.025 | ASTM D5470 | |
| Drying @ 0.1mm / 22°C | min | 120 | GALLOP |
