GTP-TAP010 Thermal Tape
GTP-TAP010 is a double-sided fiberglass reinforced thermal conductive PSA tape, which exhibits outstanding thermal & insulation performance and high bond strength to a variety of surfaces. It is good for applications without heat-cure condition and screw or clip mounting designs. In addition, its low molecule contents can be a good solution for silicone sensitive applications.
Features & Benefits
- Superior thermal conductivity: 1.2W/m.K
- High insulation compatibility
- Strong bonding strength to a variety of surfaces
- Easy application
- Eliminates need for external hardware (screws, clips, etc.)
- Available with easy release tabs
- High performance, thermally conductive acrylic adhesive
- Double-sided, pressure sensitive adhesive tape
- Cost effective solution than heat-curing adhesive
Typical Applications
- Mount heatsink onto BGA graphic processor or drive processor
- Heat spreader onto power converter PCB
- Motor controller
- LED lights
- Power transistors
- TV backlights
- Install thermoelectric cooling modules
Remarks:
- Supply form: Sheet, die-cut/kiss-cut parts or roll forms
- Standard configurations: 300mm x 50M / 100M
- Data Sheet
| Item | Unit | GTP-TAP010 | Standards | |
| PHYSICAL | Color | – | White | Visual |
| Thickness | mm | 0.1-0.5 | ASTM D374 | |
| Hardness | Shore 00 | Oct-70 | ASTM D2240 | |
| Density | g/cc | 3.2 | ASTM D792 | |
| Elongation | % | 60 | ASTM D412 | |
| Tensile Strength | Psi | <15 | ASTM D412 | |
| Dielectric Strength | KV/mm | >7.5 | ASTM D149 | |
| Breakdown voltage | KV/mm | >9.0 | ASTM D149 | |
| Volume Resistivity | Ω-cm | 1.5×10¹¹ | ASTM D257 | |
| TGA Weight Loss | wt% | <0.5 | 150°C Cx24hrs | |
| Operating Temp. | °C | -40 ~ 120 | – | |
| Flammability | – | VO | UL94 | |
| THERMAL | Thermal Conductivity | W/m.K | 1.2 | ASTM D5470 |
| Thermal impedance @ 10psi / 0.15mm | °C-in²/W | 0.508 | ASTM D5470 | |
| Thermal impedance @ 20psi / 0.15mm | °C-in²/W | 0.486 | ASTM D5470 |
Shelf Life: The double-sided, pressure sensitive adhesive used in GTP-TAP products requires the use of dual liners to protect the surfaces from contaminants. Gallop recommends a 6-month shelf life at a maximum continuous storage temperature of 35°C or 3-month shelf life at a maximum continuous storage temperature of 45°C, for maintenance of controlled adhesion to the liner. The shelf life of the GTP-TAP material, without consideration of liner adhesion (which is often not critical for manual assembly processing), is recommended at 12 months from date of manufacture at a maximum continuous storage temperature of 60°C.
