GTP-AS030-D Thermal Structural Adhesive
GTP-AS030-D is a 2-component polyurethane based thermal structural adhesive and it can cure at room temperature or with heat. After mixing & curing, it is environmentally friendly, non-toxic, and free of harmful volatile substances. This adhesive offers excellent adhesion to various substrates, superior chemical resistance, and outstanding mechanical strength, making It is ideal for high-performance applications. This adhesive is a combination of high thermal conductivity and robust mechanical properties which contribute to the structural integrity and enhanced durability and safety for empowering your system design.
Features & Benefits
- High thermal conductivity: 3.0W/m.K
- 2-part system, cured at RT or high temperature
- 100% solid content, no toxic volatile contents
- Superior bonding strength for various types of substrates
- Outstanding chemical resistance for durability in harsh environments
- Exceptional mechanical strength
Typical Applications
- On-board charger, Inverter, LED ballast
- Converter, PV modules
- Transformer, high power battery packs, UPS
Remarks:
- Shelf-life can be 6 months in original container
- Available packaging: 50cc or 400cc (twin-cartridge)
Handling precautions
- Clean the substrate surface using a sandblaster or grinding wheel to remove rust and oxidation.
- Use a residue-free solvent or cleaning agent to thoroughly clean the prepared surface.
- Apply the adhesive immediately after cleaning to prevent re-oxidation, rust, or contamination of the surface.
- Avoid touching the cleaned surface with bare hands; if touched, clean again with a suitable cleaning agent.
- Ensure no liquids come into contact with the bonding surfaces during application.
Adhesive Mixing
Use the appropriate adhesive dispensing gun to extrude and apply the adhesive directly to the bonding area for optimal performance.
- Data Sheet
| Item | Unit | Part A | Part B | |
| Original Specifications prior to mixing at 22°C / 50% RH | Color | – | Black | White |
| Viscosity @ 5rpm | cps | 300000 | 284000 | |
| Viscosity @ 10rpm | cps | 272000 | 165000 | |
| Density | g/cc | 2.3 | 2.6 | |
| Mixtures at 22°C / 50% RH | Mixing ratio (by volume) | – | – | 1:1 |
| Color | – | – | Black | |
| Viscosity | Cps | – | Thixotropic | |
| Operation time | Mins | – | 20-30 | |
| Curing time @ 80°C / 100°C | Mins | – | 30 / 20 | |
| Post-cured | Hardness | Shore D | – | 70 |
| Thermal Conductivity | W/m.K | – | 3 | |
| Dielectric strength | KV/mm | – | ≥14 | |
| Volume resistance | Ω-cm | – | ≥4.5×10¹³ | |
| Surface resistance | Ω-cm | – | ≥1.6×10¹³ | |
| Shear Strength, AL-AL | Mpa | – | 9.5 | |
| Tensile strength | Mpa | – | >15 | |
| Elongation at break | % | – | 40 | |
| Service temperature | °C | – | -40 to 85 | |
| Flame rating | UL94 | – | V-0 (in compliant) |
Remarks: It is available to modify viscosity/color/curing time following specific requirement from customers.
